Productivity Analysis of Production Department with Objective Matrix Method
Abstract
PT XYZ is one of the international branded manufacturing companies engaged in the shoe industry and produces various brands of shoes. In 2024 the company's production on line 7 which produces Brooks brand shoes experienced a decrease in production results which caused the production target not to be achieved. From the production target of 526,624 units of Brooks brand shoes that have been targeted, line 7 production is only able to produce 473,405 units of shoes so that there is a decrease in the production of Brooks shoes by 10.10%. This research method used is Objective Matrix (OMAX). The results showed that the level of partial productivity in the production unit fluctuated with an increase and decrease in each period. Proposed improvements to increase productivity on line 7 are the establishment of a raw material inspection division with an analysis report (LA), integration of manufacturing information systems and ERP, and utilization of AI and IoT sensors for production efficiency.
References
Afianti, E. Z., Satriawan, I. K., & Sedana Yoga, I. W. G. (2020). Analisis Produktivitas Produksi PT. Bapak Bakery Badung Bali. Jurnal Rekayasa Dan Manajemen Agroindustri, 8(1), 127. https://doi.org/10.24843/jrma.2020.v08.i01.p13
Ahmed, M., & Ahmad, N. (2011). An application of Pareto analysis and cause-and-effect diagram (CED) for minimizing rejection of raw materials in lamp production process. Management science and engineering, 5(3), 87. https://doi.org/10.3968/j.mse.1913035X20110503.320
Aliafari, N., Suryoputro, M. R., & Rahman, N. M. (2019). Productivity analysis on batik production line using objective matrix (OMAX) method. Industrial Engineering & Management Systems, 18(4), 726-734. https://doi.org/10.7232/iems.2019.18.4.726
Arifin, M. M., Herlianti, R., Lukito, T., Lusia, V., & Agustin, M. (2024, December). Increasing productivity of stamping press manufacturing using ahp and objective matrix methods. In Proceedings ASTRAtech International Conference (Vol. 1, No. October, pp. 31-41). https://doi.org/10.52453/aic.v1iOctober.462
Aurelia, C., Noya, S., & Oktiarso, T. (2023). Analisis Produktivitas PT Torabika Eka Semesta Menggunakan Metode Objective Matrix (OMA) dan Fault Tree Analysis (FTA). Jurnal Sains Dan Aplikasi Keilmuan Teknik Industri (SAKTI), 3(1), 33–48. https://doi.org/10.33479/jtiumc.v3i1.44
Bakare, M. S., Abdulkarim, A., Zeeshan, M., & Shuaibu, A. N. (2023). A comprehensive overview on demand side energy management towards smart grids: challenges, solutions, and future direction. Energy Informatics, 6(1), 4. https://doi.org/10.1186/s42162-023-00262-7
Beraldin, A. R., Danese, P., & Romano, P. (2022). Employee involvement for continuous improvement and production repetitiveness: a contingency perspective for achieving organisational outcomes. Production Planning & Control, 33(4), 323-339. https://doi.org/10.1080/09537287.2020.1823024
Berhe, E., Abebe, B., & Azene, D. (2017). A new perspective to productivity measurement. Total Quality Management & Business Excellence, 28(1-2), 205-217. https://doi.org/10.1080/14783363.2015.1053804
Bernasconi, M., Friedli, T., & von Dzengelevski, O. (2025). The impact of current good manufacturing practices inspections on continuous improvement mindset in the pharmaceutical industry. Journal of Pharmaceutical Innovation, 20(6), 282. https://doi.org/10.1007/s12247-025-10200-7
Bernolak, I. (1997). Effective measurement and successful elements of company productivity: the basis of competitiveness and world prosperity. International Journal of Production Economics, 52(1-2), 203-213. https://doi.org/10.1016/S0925-5273(97)00026-1
Daniel, R. M., Kenward, M. G., Cousens, S. N., & De Stavola, B. L. (2012). Using causal diagrams to guide analysis in missing data problems. Statistical methods in medical research, 21(3), 243-256. https://doi.org/10.1177/0962280210394469
Dewi, K., Rusfiana, Y., Subagyo, A., & Nuradhawati, R. (2021). Teknik Analisa. Bandung: Alfabeta. UMKM (studi pada pelaku UMKM di sekitar lingkungan Kampus IAI Darussalam Martapura). Musyarakah, 1(2), 89-99.
Effendy, H., Machmoed, B. R., & Rasyid, A. (2021). Pengukuran dan Analisis Produktivitas Menggunakan Metode Objective Matrix (OMAX) (Studi Kasus: di PDAM Kabupaten Gorontalo). Jambura Industrial Review (JIREV), 1(1), 40–47. https://doi.org/10.37905/jirev.1.1.40-47
Grönroos, C., & Ojasalo, K. (2004). Service productivity: Towards a conceptualization of the transformation of inputs into economic results in services. Journal of Business research, 57(4), 414-423. https://doi.org/10.1016/S0148-2963(02)00275-8
Gustarico, A., & Putri, E. P. (2023). Analisis Produktivitas Untuk Meningkatkan Hasil Produksi dengan Menggunakan Metode Objective Matrix (Omax) (Studi Kasus : CV Bakso Empal Sapi). Jurnal Teknik Industri Terintegrasi, 6(3), 515–525. https://doi.org/10.31004/jutin.v6i3.15837
Heydari, M., Heydari, A., & Amini, M. (2023). Energy Management and Energy Consumption: A Comprehensive Study. World Information Technology and Engineering Journal, 10(04), 22-28.
Hossen, J., Ahmad, N., & Ali, S. M. (2017). An application of Pareto analysis and cause-and-effect diagram (CED) to examine stoppage losses: a textile case from Bangladesh. The journal of the textile institute, 108(11), 2013-2020. https://doi.org/10.1080/00405000.2017.1308786
Indriani, Y., Sari, R. K., & Marwa, S. (2024). Objective Matrix (OMAX) Analysis to Determine Production Productivity. Journal of Engineering Science and Technology Management (JES-TM), 4(1), 27-32. https://doi.org/10.31004/jestm.v4i1.150
Indriani, Y., Sari, R. K., & Marwa, S. (2024). Objective Matrix (OMAX) Analysis to Determine Production Productivity. Journal of Engineering Science and Technology Management (JES-TM), 4(1), 27-32.
Iqbal, N. (2024). Analisis Produktivitas Divisi Produksi Menggunakan Metode Objective Matrix (OMAX) Dan Analytical Hierarchy Proses (AHP). INTECOMS: Jurnal Teknologi Informasi dan Ilmu Komputer, 7(4), 1389-1397. https://doi.org/10.31539/intecoms.v7i4.10630
Jaradat, Z., AL-Hawamleh, A., Altarawneh, M., Al-Tahat, S., & Akram Nazzal, M. (2025). Effects of effective ERP system utilization on enterprise economic sustainability through product life cycle cost control. Journal of Business and Socio-economic Development, 5(3), 240-258. https://doi.org/10.1108/JBSED-10-2024-0103
Jassbi, J., Mohamadnejad, F., & Nasrollahzadeh, H. (2011). A Fuzzy DEMATEL framework for modeling cause and effect relationships of strategy map. Expert systems with Applications, 38(5), 5967-5973. https://doi.org/10.1016/j.eswa.2010.11.026
Magableh, A. A. A. R., Almakhadmeh, M. A., Alsrehin, N., & Klaib, A. F. (2020). Smart traffic light management systems: A systematic literature review. International Journal of Technology Diffusion (IJTD), 11(3), 22-47. https://doi.org/10.4018/IJTD.2020070102
Mukti, A. R., A’yun, Q., & Suparto, S. (2021). Analisis Produktivitas Menggunakan Metode Objective Matrix (OMAX) (Studi Kasus: Departemen Produksi PT Elang Jagad). Jurnal Teknologi Dan Manajemen, 2(1), 13–18. https://doi.org/10.31284/j.jtm.2021.v2i1.1525
Naziro, K., Perdana, Y. R., & Kristanto, D. (2025). The Supply Chain Performance Measurement and Determination of Improvement Priorities Using the Supply Chain Operations Reference–Digital Standard (SCOR DS) and Analytic Network Process (ANP) Methods:(Case Study: Waste Management at Sendangsari). Journal of Industrial Engineering and Halal Industries, 6(1), 81-88. https://doi.org/10.14421/jiehis.5294
Obeng, H. A., Arhinful, R., Mensah, L., & Mensah, C. C. (2025). The mediating role of service quality in the relationship between corporate social responsibility and sustainable competitive advantages in an emerging economy. Business Strategy & Development, 8(1), e70099. https://doi.org/10.1002/bsd2.70099
Parra, C., Morán, C., Pizarro, F., Duque, P., Aránguiz, A., González-Prida, V., & Parra, J. (2024). Implementation of the asset management, operational reliability and maintenance survey in recycled beverage container manufacturing lines. Information, 15(12), 784. https://doi.org/10.3390/info15120784
Prakoso, I. (2022). Productivity Analysis Of Split Stone Production Using Objective Matrix (Omax) Method (A Case Study). Journal of Industrial Engineering and Halal Industries, 3(1), 41-48. https://doi.org/10.14421/jiehis.3498
Prasad, A. A., & Kumar, R. S. (2022). Challenges and opportunities of brand corporate social responsibility classification: A review, new conceptualization and future research agenda. International journal of consumer studies, 46(6), 2071-2103. https://doi.org/10.1111/ijcs.12844
Pratama, A. T., Ernawati, D., & Rahmawati, N. (2025). Performance Analysis Of Green Supply Chain Management Using AHP And OMAX Methods. Jurnal Sistem Cerdas, 8(1), 99-112. https://doi.org/10.37396/jsc.v8i1.498
Pratomo, M. H. P., & Prassetiyo, H. (2022). Usulan Pengurangan Kecacatan Produk Kaos Polo Menggunakan Metode Failure Mode and Effect Analysis (Fmea) & 5w 1h Di Cv New Bandung Mulia Konveksi. e-Proceeding FTI.
Rumman, M. A. A., & Alqudah, E. (2024). The impact of green HRM on lean soft practices implementation: a mediating role of organizational flexibility. Global Journal of Flexible Systems Management, 25(4), 705-731. https://doi.org/10.1007/s40171-024-00406-y
Saaty, T. L. (2005). The analytic hierarchy and analytic network processes for the measurement of intangible criteria and for decision-making. In Multiple criteria decision analysis: state of the art surveys (pp. 363-419). New York, NY: Springer New York. https://doi.org/10.1007/978-1-4939-3094-4
Sani, I., Karnawati, T. A., & Ruspitasari, W. D. (2024). The Impact of Service Quality on Custumer Loyalty Through Customer Satisfaction of PT Multicom Persada International Jakarta. Dinasti International Journal of Management Science (DIJMS), 5(3).
Suryani, P., Cahyono, Y., & Utami, B. D. (2020). Pengaruh Motivasi Dan Gaya Kepemimpinan Terhadap Produktivitas Kerja Karyawan Produksi di PT Tuntex Garment Indonesia. Journal of Industrial Engineering & Management Research, 1(1b), 70-82. https://doi.org/10.7777/jiemar.v1i1.28
Trojanowska, J., Kolinski, A., Galusik, D., Varela, M. L., & Machado, J. (2017). A methodology of improvement of manufacturing productivity through increasing operational efficiency of the production process. In Advances in Manufacturing (pp. 23-32). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-68619-6_3
Wahyuni, N., & Alya, R. (2020, December). Productivity measurement using Objective Matrix: case study in plate mill. In IOP Conference Series: Materials Science and Engineering (Vol. 909, No. 1, p. 012073). IOP Publishing. https://doi.org/10.1088/1757-899X/909/1/012073
Wiwik, S. (2019). Pengukuran Kinerja Supply Chain Menggunakan Scor dan Aplikasi Analytic Network Proses (ANP) di PT. Pertiwi Mas Adi Kencana Sidoarjo.
Xu, Z., & Dang, Y. (2020). Automated digital cause-and-effect diagrams to assist causal analysis in problem-solving: a data-driven approach. International Journal of Production Research, 58(17), 5359-5379. https://doi.org/10.1080/00207543.2020.1727043
Zabidi, Y., Pirdaus, R., Mauidzoh, U., Astuti, M., & Nurdin, R. (2024, January). Productivity Analysis Using the Objective Matrix and Fishbone Diagram Methods in SMEs of Airplane Replicas. In 2024 ASU International Conference in Emerging Technologies for Sustainability and Intelligent Systems (ICETSIS) (pp. 904-907). IEEE. https://doi.org/10.1109/ICETSIS61505.2024.10459644
Copyright (c) 2025 Journal La Multiapp
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
