Analysis Defect Products in Silencers Using the New Seven Tools Method
Abstract
Quality is important for a product so that it can have more value than other products. To maintain quality, quality assurance (quality) is required. As is the case with silencer products produced by CV. Nyoto Plastik, silencer is a product that must maintain its quality value. Therefore, many defects in silencer products must be repaired by analyzing the causes of the defects. Based on research, the average defect in this silencer product reaches 10% within one year. New Seven Tools is a method for finding out the causes of defects based on humans, methods, materials, machines or the environment by using the seven tools contained in it. Therefore, this research aims to help maintain the quality of silencers by analyzing the causes of defects and providing suggestions for improvements to minimize defects that occur using the New Seven Tools method.
References
Abubakar, A. S., Haron, N. A., Alias, A. H., & Hua, L. T. (2023). Exploring quality dimensions from a construction perspective: A literature review. Jurnal Teknologi (Sciences & Engineering), 85(4), 133-141. http://dx.doi.org/10.11113/jurnalteknologi.v85.19319
Adhikari, D. R., & Shrestha, P. (2023). Knowledge management initiatives for achieving sustainable development goal 4.7: higher education institutions’ stakeholder perspectives. Journal of Knowledge Management, 27(4), 1109-1139. http://dx.doi.org/10.1108/JKM-03-2022-0172
Alzoubi, H. M., Ahmed, G., & Alshurideh, M. (2022). An empirical investigation into the impact of product quality dimensions on improving the order-winners and customer satisfaction. International Journal of Productivity and Quality Management, 36(2), 169-186. http://dx.doi.org/10.1504/IJPQM.2022.124711
Alzoubi, H. M., In'airat, M., & Ahmed, G. (2022). Investigating the impact of total quality management practices and Six Sigma processes to enhance the quality and reduce the cost of quality: the case of Dubai. International journal of business excellence, 27(1), 94-109. https://doi.org/10.1504/IJBEX.2022.123036
Ardhiansyah, W., Tjendani, H. T., & Witjaksana, B. (2023). Analysis of Contractor Performance on Stakeholder Satisfaction in Construction Expenditure Projects Rehabilitation of Malang City Using the PLS Method. Devotion: Journal of Research and Community Service, 4(1), 44-58. https://doi.org/10.36418/dev.v4i1.347
Arianti, M. S., Rahmawati, E., & Prihatiningrum, R. R. Y. (2020). Analisis pengendalian kualitas produk dengan menggunakan statistical quality control (SQC) pada usaha amplang karya bahari di Samarinda. Jurnal Bisnis dan Pembangunan, 9(2), 1-13. https://dx.doi.org/10.20527/jbp.v9i2.8863
Dutta, G., Kumar, R., Sindhwani, R., & Singh, R. K. (2021). Digitalization priorities of quality control processes for SMEs: A conceptual study in perspective of Industry 4.0 adoption. Journal of Intelligent Manufacturing, 32(6), 1679-1698. https://link.springer.com/article/10.1007/s10845-021-01783-2
Erdhianto, Y. (2021). Quality Control Analysis to reduce the number of defects in the packaging of PG Kremboong Sugar Products using seven tools method. Tibuana Journal of Applied Industrial Engineering, 4(1), 1. http://dx.doi.org/10.36456/tibuana.4.01.3174.28-35
Gasperz, V. (1997). Manajemen bisnis total. PT. Gramedia Jakarta.
Hajian, M., & Kashani, S. J. (2021). Evolution of the concept of sustainability. From Brundtland Report to sustainable development goals. In Sustainable resource management (pp. 1-24). Elsevier. https://doi.org/10.1016/B978-0-12-824342-8.00018-3
Hossen, J., Ahmad, N., & Ali, S. M. (2017). An application of Pareto analysis and cause-and-effect diagram (CED) to examine stoppage losses: a textile case from Bangladesh. The journal of the textile institute, 108(11), 2013-2020.
Islachiyana, R., Zunaidi, A., Puspitasari, D. A., & Mahmudi, D. (2023). Strategi Pengendalian Biaya Produksi: Analisis Perlakuan Akuntansi Produk Cacat di Usaha Kerajinan Terbang Bani Syafi’i. Proceedings of Islamic Economics, Business, and Philanthropy, 2(1), 99-118.
Islam, R. (2005). Rioritization of ideas in an affinity diagram by the AHP: An example of k-economy. International Journal of Economics, Management and Accounting, 13(1). https://doi.org/10.31436/ijema.v13i1.108
Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2022). Enabling flexible manufacturing system (FMS) through the applications of industry 4.0 technologies. Internet of Things and Cyber-Physical Systems, 2, 49-62. https://doi.org/10.1016/j.iotcps.2022.05.005
Lafeniya, S. D. A., & Suseno, S. (2023). Pengendalian Kualitas produk Kain Grey Dengan metode new seven tools pada pt djohartex. Jurnal Inovasi Dan Kreativitas (JIKa), 2(2), 46-56. http://dx.doi.org/10.30656/jika.v2i2.6003
Lestari, F. A., & Purwatmini, N. (2021). Pengendalian Kualitas Produk Tekstil Menggunakan Metoda DMAIC. Jurnal Ecodemica: Jurnal Ekonomi Manajemen dan Bisnis, 5(1), 79-85. https://doi.org/10.31294/jeco.v5i1.9233
Lone, R. A., & Bhat, M. A. (2022). Product quality and customer loyalty: A review of literature. International Journal of Management IT and Engineering, 12(3), 8-27.
Lu, Y., Morris, K. C., & Frechette, S. (2016). Current standards landscape for smart manufacturing systems. National Institute of Standards and Technology, NISTIR, 8107(3), 1-39. http://dx.doi.org/10.6028/NIST.IR.8107
Matzler, K., & Hinterhuber, H. H. (1998). How to make product development projects more successful by integrating Kano's model of customer satisfaction into quality function deployment. Technovation, 18(1), 25-38. https://doi.org/10.1016/S0166-4972(97)00072-2
Mehra, S., & Agrawal, S. P. (2003). Total quality as a new global competitive strategy. International Journal of Quality & Reliability Management, 20(9), 1009-1025. http://dx.doi.org/10.1108/02656710310500824
Nazia, S., & Fuad, M. (2023). Peranan Statistical Quality Control (SQC) Dalam Pengendalian Kualitas: Studi Literatur. Jurnal Mahasiswa Akuntansi Samudra, 4(3), 125-138. https://doi.org/10.33059/jmas.v4i3.8079
Pardosi, A. R., & Sumiati, S. (2024). Analisis Produk Kaos Oblong untuk Meminimalisir Defect dengan Metode New Seven Tools di Konveksi Graha Konveksindo. Briliant: Jurnal Riset dan Konseptual, 9(4), 998-1010.
Parhusip, B. R. (2023). Quality Control Pedoman Penjaminan Mutu dan Pengendalian Mutu. CV. Eureka Media Aksara.
Powell, D., Magnanini, M. C., Colledani, M., & Myklebust, O. (2022). Advancing zero defect manufacturing: A state-of-the-art perspective and future research directions. Computers in Industry, 136, 103596. https://doi.org/10.1016/j.compind.2021.103596
Prabowo, R., & Wijaya, S. (2020). Integrasi New Seven Tools dan TRIZ (Theory of Inventive Problem Solving) untuk Pengendalian Kualitas Produk Kran (Studi Kasus: PT. Ever Age Valves Metals–Wringinanom, Gresik). Jurnal Teknik Industri, 10(1), 22-30. https://doi.org/10.25105/jti.v10i1.8386
Prakosa, A. A. S., Rochmoeljati, R., & Nugraha, I. (2024). Analisis Kualitas Defect Produk Pupuk Dolomit dengan Metode New Seven Tools dan Failure Mode and Effect Analysis (FMEA) di PT. XYZ. Tekmapro, 19(2). https://doi.org/10.33005/tekmapro.v19i2.414
Psarommatis, F., Sousa, J., Mendonça, J. P., & Kiritsis, D. (2022). Zero-defect manufacturing the approach for higher manufacturing sustainability in the era of industry 4.0: a position paper. International Journal of Production Research, 60(1), 73-91. https://doi.org/10.1080/00207543.2021.1987551
Purwanto, H. (2017). Penerapan Metode Profile Matching Dalam Sistem Pendukung Keputusan Penilaian Kinerja Karyawan Pada Pt. Hyundai Mobil Indonesia Cabang Kalimalang. Jurnal Techno Nusa Mandiri, 14(1), 15-20.
Putri, A. R. A., & Bachtiar, I. (2024). Usulan Perbaikan Kualitas Produk Tas Ransel Berdasarkan Quality Control New Seven Tools dan Kaizen. Jurnal Riset Teknik Industri, 11-18. https://doi.org/10.29313/jrti.v4i1.3803
Ramiawati. (2020). Total Quality Management (I. Safar (ed.)). CV. Nas Media Pustaka.
Rifaldi, M., & Sudarwati, W. (2024). Penerapan Metode Six Sigma dan FMEA Sebagai Usaha untuk Menggurangi Cacat pada Produk Bracket. Prosiding Semnastek.
Setiawan, A., & Nuryanto, S. T. (2023). Analisis Pengendalian Kualitas Kemasan Air Minum Jenis Galon Cleo Dengan Metode New Seven Tools. Jurnal Cakrawala Ilmiah, 2(11), 4371-4380. https://doi.org/10.53625/jcijurnalcakrawalailmiah.v2i11.6139
Shahriar, M. M., Parvez, M. S., Islam, M. A., & Talapatra, S. (2022). Implementation of 5S in a plastic bag manufacturing industry: A case study. Cleaner Engineering and Technology, 8, 100488. https://doi.org/10.1016/j.clet.2022.100488
Shukla, N., Keast, J. E., & Ceglarek, D. (2014). Improved workflow modelling using role activity diagram-based modelling with application to a radiology service case study. Computer methods and programs in biomedicine, 116(3), 274-298. https://doi.org/10.1016/j.cmpb.2014.05.005
Wahyudi, R. D., Singgih, M. L., & Suef, M. (2022, September). Prior and Future Research on Quality-Driven Product Service Systems: A Literature Review. In Proceedings of the 2022 International Conference on Engineering and Information Technology for Sustainable Industry (pp. 1-4). https://doi.org/10.1145/3557738.3557838
Wang, J., Setiawansyah, S., Rahmanto, Y., & Asistyasari, A. (2024). Decision Support System for Choosing the Best Shipping Service for E-Commerce Using the SAW and CRITIC Methods. Jurnal Ilmiah Informatika dan Ilmu Komputer (JIMA-ILKOM), 3(2), 101-109. https://doi.org/10.58602/jima-ilkom.v3i2.32
Wang, R., Ke, C., & Cui, S. (2022). Product price, quality, and service decisions under consumer choice models. Manufacturing & Service Operations Management, 24(1), 430-447. http://dx.doi.org/10.1287/msom.2020.0947
Yusnita, E., & Puspita, R. (2020). Analisa pengendalian kualitas paving block dengan metode new seven tools di CV. Arga Reyhan Bahari Sumatera Utara. Journal of Industrial and Manufacture Engineering, 4(2), 138-147. https://doi.org/10.31289/jime.v4i2.3812
Zakeri, S., Chatterjee, P., Cheikhrouhou, N., & Konstantas, D. (2022). Ranking based on optimal points and win-loss-draw multi-criteria decision-making with application to supplier evaluation problem. Expert Syst. Appl., 191(November 2020), 116258. http://dx.doi.org/10.1016/j.eswa.2021.116258
Zhao, C., Wang, X., Xiao, Y., & Sheng, J. (2022). Effects of online reviews and competition on quality and pricing strategies. Production and Operations Management, 31(10), 3840-3858. https://doi.org/10.1111/poms.13791
Copyright (c) 2025 Journal La Multiapp
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
