Design and Build of Communication Protocol Trainer Tools on Networks between PLCs and HMIs

Hendy Rudiansyah; Ridwan Ridwan; Wahyudi Purnomo; Dini Hadiani; Muhammad Zidan Arrizik

doi:10.37899/journallamultiapp.v5i6.1633

Hendy Rudiansyah Politeknik Manufaktur Bandung, Teknik Otomasi Manufaktur dan Mekatronika
Ridwan Politeknik Manufaktur Bandung, Teknik Otomasi Manufaktur dan Mekatronika
Wahyudi Purnomo Politeknik Manufaktur Bandung, Teknik Otomasi Manufaktur dan Mekatronika
Dini Hadiani Politeknik Manufaktur Bandung, Teknik Otomasi Manufaktur dan Mekatronika
Muhammad Zidan Arrizik Politeknik Manufaktur Bandung, Teknik Otomasi Manufaktur dan Mekatronika

DOI: https://doi.org/10.37899/journallamultiapp.v5i6.1633

Keywords: Communication Protocol, Effectiveness, HMI, PLC, Trainer Tools

Abstract

With the rapid advancement of science and technology, the role of technology in industry is also increasing, particularly through automation that simplifies and enhances work process efficiency. To support this development, education plays a crucial role in enhancing students' competencies. One relevant subject in industrial technology is Programmable Logic Controller (PLC). In PLC education, trainer tools are used to help students understand industrial control concepts. At Politeknik Manufaktur Bandung, particularly in the Mechatronics and Automation Engineering Technology programs, the use of PLC trainers is still limited to basic input-output features. Survey results show that most students only understand Ethernet communication protocol and have never connected more than one PLC in a single system, resulting in a limited understanding of inter-PLC communication. This research aims to develop a trainer that teaches various PLC communication protocols, including Controller Link, DeviceNet, Serial RS-232C, and Ethernet, with inter-PLC and HMI communication implementation. The system uses three PLCs, where an Omron CP1H PLC as the master uses Controller Link to communicate with another Omron CP1H PLC as a slave, DeviceNet for remote slave devices, Serial RS-232C to communicate with an Omron CJ2M PLC as a slave, and Ethernet connected to Human Machine Interfaces (HMI) Omron NB7W and Kinco GL070E for PLC data monitoring. Based on the assessment results, the overall trainer tool evaluated received an effectiveness score of 95.1% from 6 aspects of the assessment. This trainer is expected to enhance students’ understanding of PLC communication protocols and their applications in integrated systems.

Author Biography

Hendy Rudiansyah, Politeknik Manufaktur Bandung, Teknik Otomasi Manufaktur dan Mekatronika

References

Afifa, K., & Astuti, T. (2024). The Effect of Digital Learning Media on Motivation and Learning Outcomes of IPAS. Jurnal Penelitian Pendidikan IPA, 10(6), 3155-3165. https://doi.org/10.29303/jppipa.v10i6.7513

Aminah, S., Maulana, G., & Wibisono, D. A. (2019). Rancang Bangun Sistem Monitoring Kualitas Air pada Tambak Udang Berbasis Internet of Things. Seminar Nasional Informatika Dan Aplikasinya (SNIA), September, B-2.

Aminah, S., Mulyadi, A. D., & Erdani, Y. (2019). The Wireless Acquisition Data System Simulator Design on Automatic Weather Monitoring Station. MOTIVECTION : Journal of Mechanical, Electrical and Industrial Engineering, 1(3), 51–62. https://doi.org/10.46574/motivection.v1i3.33

Barbieri, G., Fantuzzi, C., & Borsari, R. (2014). A model-based design methodology for the development of mechatronic systems. Mechatronics, 24(7), 833-843. https://doi.org/10.1016/j.mechatronics.2013.12.004

Castrena Abadi, S., Rokhim, I., Wiyono, A., & Rahmah, M. (2023). Rancang Bangun Teaching Aid Motor Servo AC R88M Berbasis PLC NX1P2 Sebagai Alat Bantu Pengajaran. JTRM (Jurnal Teknologi Dan Rekayasa Manufaktur), 5(2), 139–152. https://doi.org/10.48182/jtrm.v5i2.141

Gunawan, & Ritonga, A. A. (2019). Media Pembelajaran Berbasis Industri 4.0. In UNIVERSITAS ISLAM SUMATERA UTARA MEDAN (Vol. 01).

Jawahir, M., & Alfita, R. (2020). Rancang Bangun Modul Trainer Praktik Instalasi Listrik Dan Motor. Seminar Nasional Fortei Regional, 7, 1–7.

Katona, B., Venkataragavan, J., Nina, E., Ulrika, B., & Björn, O. (2022). Use of visual learning media to increase student learning motivation. World Psychology, 1(3), 161-176. https://doi.org/10.55849/wp.v1i3.381

Maulana, G. G., Mada, R., & Purba, R. R. (2022). Automation Storage System Based On SCADA Using PLC CP1H and CP1L. Jurnal Rekayasa Elektrika, 18(3), 144–151. https://doi.org/10.17529/jre.v18i3.26363

Maulana, G. G., Purnomo, W., & Suryatini, F. (2019). Desain Implementasi Material Handling Equipment Untuk Distribusi Bahan Dan Produk Pada Industri. Journal of Chemical Information and Modeling, 53(9), 1689–1699. https://doi.org/10.33559/eoj.v1i2.32

Moto, M. M. (2019). Pengaruh Penggunaan Media Pembelajaran dalam Dunia Pendidikan. Indonesian Journal of Primary Education, 3(1), 20–28. https://doi.org/10.17509/ijpe.v3i1.16060

Mugono, S., & Musyahar, G. (2021). Rancang Bangun Trainer Kendali Berbasis PLC Mitsubishi FX3U 24 MR Di Watussalam Textile. Jurnal Cahaya Bagaskara, 6(1), 10–19.

Nugraha, N. W., Supriyanto, H., & Syahmenan, M. N. A. (2019). Rancang Bangun Sistem Panen Propolis Otomatis untuk Sarang Lebah Modular Trigona Hive Berbasis Raspberry PI DAN Komunikasi SMS. IRWNS (Industial Research Workshop and National Seminar), 239–249.

Permatasari, D. C., Fahreza, M. A. R., Haitsam, H., & Pamungkas, D. W. (2023). Rancang Bangun Alat Trainer Kontrol Berbasis PLC Omron CP2E untuk Media Pembelajaran. JEECOM Journal of Electrical Engineering and Computer, 5(1), 11–16. https://doi.org/10.33650/jeecom.v5i1.5814

Puspitarini, Y. D., & Hanif, M. (2019). Using Learning Media to Increase Learning Motivation in Elementary School. Anatolian Journal of Education, 4(2), 53-60. https://doi.org/10.29333/aje.2019.426a

Ramadani, D., & Almasri, A. (2023). Pengembangan Trainer Mini Industri (Shorting Machine) Berbasis Plc Omron sebagai Media Pembelajaran pada Mata Pelajaran Pengendali Sistem Robotik SMK Negeri 1 Sumatera Barat. Jurnal Pendidikan Tambusai, 7(1), 4397–4406. https://doi.org/10.31004/jptam.v7i1.5934

Razik, A., & Almasri, A. (2023). Rancang Bangun Prototype Pick and Place Berbasis PLC Sebagai Media Pembelajaran. Voteteknika (Vocational Teknik Elektronika Dan Informatika), 11(3), 269. https://doi.org/10.24036/voteteknika.v11i3.123022

Rokhim, I., Anggraeni, P., Khoirunnisa, H., & Purnama, H. M. (2021). Pengendalian End Effector Robot Lengan untuk Aplikasi Pick and Place dengan Metode Persamaan Garis. JTERA (Jurnal Teknologi Rekayasa), 6(1), 7. https://doi.org/10.31544/jtera.v6.i1.2021.7-14

Sanusi, U. (2019). Peran Pancasila Dalam Perkembangan Dan Kemajuan Ilmu Pengetahuan Dan Teknologi. Jurnal TEDC, 13(3), 311–318. https://ejournal.poltektedc.ac.id/index.php/tedc/article/view/316

Tavčar, J., Duhovnik, J., & Horváth, I. (2019). From validation of medical devices towards validation of adaptive cyber-physical systems. Journal of Integrated Design and Process Science, 23(1), 37-59. https://doi.org/10.29303/jppipa.v10i6.7513

Wigenaputra, D. H., Ramdan, A., & Akbar, F. (2023). Meningkatkan Kapasitas Produksi Susu Kemasan Kaleng Melalui Perancangan Mesin Palletizing. Machine : Jurnal Teknik Mesin, 9(2), 31–37. https://doi.org/10.33019/jm.v9i2.4615