Analysis of Work Posture tn the Car Body Assembly Process Using the Rapid Entire Body Assessment Method
Abstract
CV. Faisyal Putra Mandiri located at Kandangan Rejo Lebar street No.11 Surabaya City, is one of the manufacturing industry companies engaged in car body production. In their work activities there are still workers who do not apply ergonomic work postures while working. Unergonomic work positions can cause some parts of the body to not be in their normal position so that they are very vulnerable to musculoskeletal disorders. To overcome these problems, work posture improvement is carried out. Based on the results of the study, it was found that after simulating the use of tools in the metal cutting process, namely the Hydraulic Scissor Lift Table, it can reduce the risk of worker injury through a final REBA value of 7 with a moderate risk level to a final REBA value of 2 with a low risk level. Then in the welding process can reduce the risk of worker injury through the final REBA value of 9 with a high risk level to the final REBA value of 3 with a low risk level. In addition, it is recommended to use a chair as a tool, which is proven through work simulation to reduce the risk of injury. In metal cutting, the REBA value drops from 7 with a moderate risk level to 3 with a low risk level, and in welding, from 9 with a high risk level to 3 with a low risk level.
References
Adiyanto, O., Mohamad, E., Jaafar, R., Ma’ruf, F., Faishal, M., & Anggraeni, A. (2022). Application of Nordic body map and rapid upper limb assessment for assessing work-related musculoskeletal disorders: A case study in small and medium enterprises. International Journal of Integrated Engineering, 14(4), 10-19. Https://doi.org/10.30880/ijie.2022.14.04.002
Amri, A. N., & Putra, B. I. (2022). Ergonomic Risk Analysis of Musculoskeletal Disorders (MSDs) Using ROSA and REBA Methods On Administrative Employees Faculty Of Science. Journal of Applied Engineering and Technological Science (JAETS), 4(1), 104-110. https://doi.org/10.37385/jaets.v4i1.954
Ansari, N. A., & Sheikh, M. J. (2014). Evaluation of work Posture by RULA and REBA: A Case Study. IOSR Journal of Mechanical and Civil Engineering, 11(4), 18-23. https://doi.org/10.9790/1684-11431823
Azmi, A., Fitra, F., & Suroso, M. (2021). Penerapan Data Antropometri Dalam Perancangan Alat Pengupas Sabut Kelapa Ekonomis. Jurnal ARTI (Aplikasi Rancangan Teknik Industri), 16(1), 94-99.
Azwar, A. G. (2020). Analisis Postur Kerja Dan Beban Kerja Dengan Menggunakan Metode Nordic Body Map Dan Nasa-Tlx Pada Karyawan Ukm Ucong Taylor Bandung. Techno-Socio Ekonomika, 13(2), 90-101. https://doi.org/10.32897/techno.2020.13.2.424
Bazaluk, O., Tsopa, V., Cheberiachko, S., Deryugin, O., Radchuk, D., Borovytskyi, O., & Lozynskyi, V. (2023). Ergonomic risk management process for safety and health at work. Frontiers in Public Health, 11, 1253141. https://doi.org/10.3389/fpubh.2023.1253141
Cohen, A. L. (1997). Elements of ergonomics programs: a primer based on workplace evaluations of musculoskeletal disorders. DIANE Publishing.
Dianat, I., Molenbroek, J., & Castellucci, H. I. (2018). A review of the methodology and applications of anthropometry in ergonomics and product design. Ergonomics, 61(12), 1696-1720. https://doi.org/10.1080/00140139.2018.1502817
Gajšek, B., Draghici, A., Boatca, M. E., Gaureanu, A., & Robescu, D. (2022). Linking the use of ergonomics methods to workplace social sustainability: The Ovako working posture assessment system and rapid entire body assessment method. Sustainability, 14(7), 4301. https://doi.org/10.3390/su14074301
Ginting, R. (2010). perancangan produk, Graha Ilmu.
Hasibuan, H., Purba, B., Marzuk, M., Sianturi, M. E., Armus, A., Gusty, S., ... & Jamaludin, J. (2020). Teknik Keselamatan dan Kesehatan Kerja.
Hignett, S., & McAtamney, L. (2000). Rapid entire body assessment (REBA). Applied ergonomics, 31(2), 201-205. https://doi.org/10.1016/S0003-6870(99)00039-3
Ir Julianus Hutabarat, M. S. I. E. (2021). Dasar-dasar pengetahuan ergonomi. Media Nusa Creative (MNC Publishing).
Iridiastadi, H., MSIE, P. D., & Yassierli, P. D. (2014). Ergonomi suatu pengantar. Bandung: PT. Remaja Rosdakarya.
Julianus, H. (2019). Work posture analysis by using rapid upper limb assessment (RULA) and rapid entire body assessment (REBA) methods (Case Study: Rice Milling In Malang-East Java of Indonesia). In IOP conference series: materials science and engineering (Vol. 469, No. 1, p. 012012). IOP Publishing. https://doi.org/10.1088/1757-899X/469/1/012012
Karwowski, W. (2006). The discipline of ergonomics and human factors. Handbook of human factors and ergonomics, 1-31. https://doi.org/10.1002/0470048204.ch1
Miswari, N., Aulia, L., & Wahyudi, R. (2021). Penilaian Postur Kerja Manual Material Handling (MMH) pada Gedung Bertingkat Menggunakan Metode Rapid Upper Limb Assessment (RULA). Sebatik. 25(1), 262 – 270 https://doi.org/10.46984/sebatik.v25i1.1160
Nurmianto, E. (2004). Ergonomi: Konsep dasar dan aplikasinya, edisi kedua. Surabaya: Guna Widya.
Rizkya, I., Syahputri, K., Sari, R. M., & Siregar, I. (2018, February). Evaluation of work posture and quantification of fatigue by Rapid Entire Body Assessment (REBA). In IOP Conference Series: Materials Science and Engineering (Vol. 309, No. 1, p. 012051). IOP Publishing. https://doi.org/10.1088/1757-899X/309/1/012051
Tarwaka, S., & Sudiajeng, L. (2004). Ergonomi untuk keselamatan, kesehatan kerja dan produktivitas.
Wignjosoebroto, S. (2006). Pengantar Teknik dan Manajemen Industri (IK Gunarta. Guna Widya.
Wijaya, K. (2019). Identifikasi risiko ergonomi dengan metode nordic body map terhadap pekerja konveksi sablon baju. In Seminar dan Konferensi Nasional IDEC (Vol. 1, pp. 1-9).
Yani, I., Andrian, D., & Zakaria, R. (2022). Analisis Risiko Ergonomi Terhadap Keluhan Muskuloskeletal Disorders (MSDS) Pada Pekerja Konveksi Jaya Taylor Di Desa Sukamakmur Kecamatan Simeulue Timur Kabupaten Simeulue Tahun 2022. Journal of Health and Medical Science, 59-67. https://doi.org/10.51178/jhms.v2i1.1007
Copyright (c) 2024 Journal La Multiapp
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
